Hakutulokset
Hakutulokset
Haulla "103" löytyi 646 tulosta.
ISO 10360-12:2016 specifies the acceptance tests for verifying the performance of an articulated arm CMM by measuring calibrated test lengths as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the articulated ...
https://sales.sfs.fi/julkaisu.html.stx?id=443034
ISO 10319:2015 describes an index test method for the determination of the tensile properties of geosynthetics (polymeric, glass, and metallic), using a wide-width strip. It is applicable to most geosynthetics, including woven geotextiles, nonwoven geotextiles, geocomposites, knitted geotextiles, ...
https://sales.sfs.fi/julkaisu.html.stx?id=378748
This part of ISO 10360 specifies the acceptance test which verifies that the performance of four-axis coordinate measuring machines (CMM) is in accordance with that stated by the manufacturer. It also specifies the reverification test, which enables the user to reverify the performance of a four- ...
https://sales.sfs.fi/julkaisu.html.stx?id=11483
ISO 10343:2009, together with ISO 15004-1, specifies requirements and test methods for continuously or digitally indicating ophthalmometers. Certain types of ophthalmometer are capable of measuring radii of curvature of contact lenses as described in ISO 18369-3:2006, 4.1. It is assumed that the ...
https://sales.sfs.fi/julkaisu.html.stx?id=295406
ISO 10342:2010 together with ISO 15004-1, specifies requirements and test methods for eye refractometers using an objective measuring principle. It is limited to the measurement of spherocylindrical refractive error.
ISO 10342:2010 takes precedence over ISO 15004-1, if differences exist.
The st ...
https://sales.sfs.fi/julkaisu.html.stx?id=150922
ISO 10326-1:2016 specifies basic requirements for the laboratory testing of vibration transmission through a vehicle seat to the occupant. These methods for measurement and analysis make it possible to compare test results from different laboratories for equivalent seats.
It specifies the test me ...
https://sales.sfs.fi/julkaisu.html.stx?id=445141
ISO 10321:2008 specifies an index test method for determination of the tensile properties of joints and seams in geosynthetics, using a wide-width strip. The method is applicable to most geosynthetics. It is also applicable to geogrids, but the specimen dimensions may need to be altered. This tes ...
https://sales.sfs.fi/julkaisu.html.stx?id=112123
The intent of ISO 10318-2:2015 is to define property symbols, graphical symbols, and pictograms used in EN and ISO geosynthetics standards. Definitions of particular or specific symbols and pictograms terms not included in this this part of ISO 10318 can be found in the International Standards de ...
https://sales.sfs.fi/julkaisu.html.stx?id=377388
The intent of ISO 10318-1:2015 is to define terms related to functions, products, properties, and other terms used in EN and ISO geosynthetics standards. Definitions of terms not included in ISO 10318-1:2015 can be found in the International Standards describing appropriate test methods.
See also ...
https://sales.sfs.fi/julkaisu.html.stx?id=377383
ISO 10350 identifies specific test procedures for the acquisition and presentation of comparable data for certain basic properties of plastics. In general, each property is specified by a single experimental value, although in certain cases properties are represented by two values obtained under ...
https://sales.sfs.fi/julkaisu.html.stx?id=920738
SFS-EN ISO 10360-12:2016:en – Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)
Verkkokaupan tuotteet
SFS-EN ISO 10319:en – Geosynthetics. Wide-width tensile test (ISO 10319:2015)
Verkkokaupan tuotteet
SFS-EN ISO 10360-3:en – Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)
Verkkokaupan tuotteet
SFS-EN ISO 10343:en – Silmälääketieteelliset instrumentit. Oftalmometrit
Verkkokaupan tuotteet
SFS-EN ISO 10342:en – Silmälääketieteen instrumentit. Refraktometrit
Verkkokaupan tuotteet
SFS-EN ISO 10326-1:2016:en – Mekaaninen värähtely. Laboratoriomenetelmä ajoneuvon istuintärinän arvioimiseksi. Osa 1: Perusvaatimukset
Verkkokaupan tuotteet
SFS-EN ISO 10321:en – Geosynthetics. Tensile test for joints/seams by wide-width strip method (ISO 10321:2008)
Verkkokaupan tuotteet
SFS-EN ISO 10318-2:en – Geosynthetics. Part 2: Symbols and pictograms (ISO 10318-2:2015)
Verkkokaupan tuotteet
SFS-EN ISO 10318-1:en – Geosynthetics. Part 1: Terms and definitions (ISO 10318-1:2015)
Verkkokaupan tuotteet
SFS-EN ISO 10350-2:2020:en – Plastics. Acquisition and presentation of comparable single-point data. Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2020)
Verkkokaupan tuotteet