Hakutulokset
Hakutulokset
Haulla "150" löytyi 847 tulosta.
This part of ISO 15087 gives requirements, including dimensions, for Warwick James dental elevators.
The standards writing body responsible for this document in Finland is General Industry Federation.
https://sales.sfs.fi/julkaisu.html.stx?id=12623
This part of ISO 15087 specifies the general material and performance requirements for dental elevators.
The standards writing body responsible for this document in Finland is General Industry Federation.
https://sales.sfs.fi/julkaisu.html.stx?id=12622
This International Standard specifies requirements for strong points for attaching chains, cables and lines for anchoring, mooring and towing small craft. It does not specify the requirement for any strong point from which the craft can tow other vessels. This standard is applicable to small craf ...
https://sales.sfs.fi/julkaisu.html.stx?id=708401
ISO 15065:2005 specifies the dimensions and designation of countersinks for countersunk head screws with a head configuration in accordance with ISO 7721. It is applicable to the types of screws according to ISO 2009, ISO 2010, ISO 1482, ISO 1483, ISO 7046-1 and ISO 7046-2, ISO 7047, ISO 7050, IS ...
https://sales.sfs.fi/julkaisu.html.stx?id=12617
ISO 15025:2016 specifies two procedures (surface ignition and bottom-edge ignition) for determining flame spread properties of vertically oriented flexible materials in the form of single or multicomponent fabrics (coated, quilted, multilayered, sandwich constructions and similar combinations), w ...
https://sales.sfs.fi/julkaisu.html.stx?id=453835
This document specifies the methods to be used in determining the properties of poly(vinyl alcohol), which is normally prepared by hydrolysis of poly(vinyl acetate) and whose composition comprises vinyl alcohol monomeric units and vinyl acetate monomeric units. This document is applicable to poly ...
https://sales.sfs.fi/julkaisu.html.stx?id=759440
ISO 15015:2011 specifies the requirements and test methods for solid flat extruded sheets of impact-modified acrylonitrile-styrene copolymer materials: acrylonitrile-butadiene-styrene (ABS), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) (commonly known as AES) and acrylonitrile-styrene ...
https://sales.sfs.fi/julkaisu.html.stx?id=171516
ISO 15011-3:2009 defines a laboratory method for measuring the emission rate of ozone during arc welding, using a hood technique. The method is directed primarily at measuring ozone emission rate when using gas-shielded arc welding processes, but it can also be employed with other processes, e.g. ...
https://sales.sfs.fi/julkaisu.html.stx?id=136028
ISO 15011-2:2009 defines laboratory methods for measuring the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) generated during arc welding, cutting and gouging, using a hood technique. The methodology is suitable for use with all ope ...
https://sales.sfs.fi/julkaisu.html.stx?id=136027
ISO 15011-1:2009 defines a laboratory method for measuring the emission rate of fume from arc welding. It also defines a method of collecting the fume for subsequent analysis and refers to suitable analytical techniques. The methods described are suitable for use with all open arc welding process ...
https://sales.sfs.fi/julkaisu.html.stx?id=136026
SFS-EN ISO 15087-2:en – Dental elevators. Part 2: Warwick James elevators (ISO 15087-2:2000)
Verkkokaupan tuotteet
SFS-EN ISO 15087-1:en – Dental elevators. Part 1: General requirements (ISO 15087-1:1999)
Verkkokaupan tuotteet
SFS-EN ISO 15084:2018:en – Small craft. Anchoring, mooring and towing. Strong points (ISO 15084:2003)
Verkkokaupan tuotteet
SFS-EN ISO 15065:en – Kartioupotukset uppokantaruuveille, joiden kannanmuoto ISO 7721 mukainen
Verkkokaupan tuotteet
SFS-EN ISO 15025:2016:en – Suojavaatetus. Suojaus kuumuutta ja liekkejä vastaan. Rajoitetun liekin leviämisen testausmenetelmä
Verkkokaupan tuotteet
SFS-EN ISO 15023-2:2019:en – Plastics. Poly(vinyl alcohol) (PVAL) materials. Part 2: Determination of properties (ISO 15023-2:2019)
Verkkokaupan tuotteet
SFS-EN ISO 15015:en – Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods (ISO 15015:2011)
Verkkokaupan tuotteet
SFS-EN ISO 15011-3:en – Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3:2009)
Verkkokaupan tuotteet
SFS-EN ISO 15011-2:en – Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging (ISO 15011-2:2009)
Verkkokaupan tuotteet
SFS-EN ISO 15011-1:en – Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009)
Verkkokaupan tuotteet