Hakutulokset
Hakutulokset
Haulla "210" löytyi 207 tulosta.
ISO 21078-2:2006 specifies procedures of chemical analysis for the determination of boron(III) oxide used as a binder component added to aluminosilicate refractories, using an acid extraction method.
It is applicable for refractories containing less than 1 % (mass fraction) of boron(III) oxide. ...
https://sales.sfs.fi/julkaisu.html.stx?id=13211
ISO 21078-1:2008 specifies methods of determining boron(III) oxide in refractory products and raw materials, in mass fractions of 0,01 % or greater. It is applicable to the determination of total boron(111) oxide in oxidic materials for ceramics, glass and glazes.
The standards writing body res ...
https://sales.sfs.fi/julkaisu.html.stx?id=100699
ISO 21068-3:2008 specifies methods for the determination of total nitrogen and nitrogen calculated as silicon nitride, total oxygen, and free metallic and oxidic components in silicon carbide raw materials and refractory products.
It applies only to silicon carbide materials that are not bonded ...
https://sales.sfs.fi/julkaisu.html.stx?id=112141
ISO 21068-2:2008 specifies analytical techniques for the determination of change in mass by thermal treatment at specified temperatures, and methods for the determination of the total carbon content, free carbon, silicon carbide, silicon, total silica and free silica content of silicon-carbide-co ...
https://sales.sfs.fi/julkaisu.html.stx?id=112140
ISO 21068-1:2008 gives definitions and specifies techniques for the preparation of samples for the chemical analysis of silicon-carbide-containing raw materials and refractory products.
The standards writing body responsible for this document in Finland is Finnish Association of Construction Pr ...
https://sales.sfs.fi/julkaisu.html.stx?id=112139
This document defines terms used in the ISO 21043 series of standards.
The standards writing body responsible for this document in Finland is Finnish Standards Association SFS.
https://sales.sfs.fi/julkaisu.html.stx?id=705249
ISO 21028-2:2018 specifies the toughness requirements of metallic materials for use at temperatures between -20 °C and -80 °C to ensure their suitability for cryogenic vessels. This document is applicable to fine-grain and low-alloyed steels with specified yield strength =460 N/mm2, aluminium a ...
https://sales.sfs.fi/julkaisu.html.stx?id=664905
ISO 21013-3:2016 provides separate calculation methods for determining the required mass flow to be relieved for each of the following specified conditions:
- vacuum-insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum, outer jacket at ambient t ...
https://sales.sfs.fi/julkaisu.html.stx?id=416309
ISO 10210:2012 describes methods for the preparation of test samples used in the determination of the ultimate aerobic and anaerobic biodegradability of plastic materials in an aqueous medium, soil, controlled compost or anaerobic digesting sludge. The methods described are designed to provide di ...
https://sales.sfs.fi/julkaisu.html.stx?id=630419
This standard specifies the general requirements for the manufacture, inspection and testing of steel, nickel base or cobalt base alloy remelting stock and castings. Particular requirements applicable to remelting stock and castings are defined in EN 2103-2 and EN 2103-3 respectively. Unless othe ...
https://sales.sfs.fi/julkaisu.html.stx?id=887923
SFS-EN ISO 21078-2:en – Determination of boron(III) oxide in refractory products. Part 2: Acid extraction method for the determination of boron(III) oxide in binder components (ISO 21078-2:2006)
Verkkokaupan tuotteet
SFS-EN ISO 21078-1:en – Determination of boron (III) oxide in refractory products. Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes (ISO 21078-1:2008)
Verkkokaupan tuotteet
SFS-EN ISO 21068-3:en – Chemical analysis of silicon-carbide-containing raw materials and refractory products. Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008)
Verkkokaupan tuotteet
SFS-EN ISO 21068-2:en – Chemical analysis of silicon-carbide-containing raw materials and refractory products. Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon (ISO 21068-2:2008)
Verkkokaupan tuotteet
SFS-EN ISO 21068-1:en – Chemical analysis of silicon-carbide-containing raw materials and refractory products. Part 1: General information and sample preparation (ISO 21068-1:2008)
Verkkokaupan tuotteet
SFS-EN ISO 21043-1:2018:en – Forensic Sciences. Part 1: Terms and definitions (ISO 21043-1:2018)
Verkkokaupan tuotteet
SFS-EN ISO 21028-2:2018:en – Kryogeeniset säiliöt. Materiaalien iskusitkeysvaatimukset kryogeenisessä lämpötilassa. Osa 2: Lämpötilat välillä -80 ja -20 °C
Verkkokaupan tuotteet
SFS-EN ISO 21013-3:2016:en – Kryogeeniset säiliöt. Varoventtiilit kryokäyttöön. Osa 3: Koon ja kapasiteetin määrittäminen
Verkkokaupan tuotteet
SFS-EN ISO 10210:2017:en – Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
Verkkokaupan tuotteet
SFS-EN 2103-1 – Aerospace series. Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specifications. Part 1: General requirements
Verkkokaupan tuotteet