Hakutulokset
Hakutulokset
Haulla "263" löytyi 111 tulosta.
ISO 17263;2012 establishes an AEI system based on radio frequency technologies. This system is intended for general application in RTTT/TICS. It allows the transfer of the identification codes and further information about equipment and vehicles used in intermodal transport into such RTTT/TICS an ...
https://sales.sfs.fi/julkaisu.html.stx?id=196623
ISO 13263:2010 specifies a method for testing the impact resistance of fittings by dropping them on to a rigid surface. For a fitting with seal-retaining components, such as seal-retaining caps or rings, the method includes assessment of the watertightness of the fittings when the fixing elements ...
https://sales.sfs.fi/julkaisu.html.stx?id=569876
This European Standard applies to the silica fume which is a by-product of the smelting process used to produce silicon metal and ferro-silicon alloys.
This part of EN 13263 gives requirements for chemical and physical properties for silica fume to be used as a type II addition in concrete confor ...
https://sales.sfs.fi/julkaisu.html.stx?id=129689
Tätä eurooppalaista standardia sovelletaan silikaan, joka on piimetallin ja ferropiilejeeringin sulatusprosessien sivutuote.
Tässä standardin EN 13263 osassa annetaan kemialliset ja fysikaaliset vaatimukset silikalle, jota käytetään tyypin II seosaineena standardin EN 206-1 mukaisessa beto ...
https://sales.sfs.fi/julkaisu.html.stx?id=402924
ISO/TR 26369:2009 reviews and evaluates the methods which are currently used to assess, for regulatory or self-regulatory purposes, the photoprotection of sun protection products applied on human body.
It is applicable to SPF and UVA protection, and both in vivo and in vitro methods.
The standa ...
https://sales.sfs.fi/julkaisu.html.stx?id=131434
https://sales.sfs.fi/julkaisu.html.stx?id=100018874
https://sales.sfs.fi/julkaisu.html.stx?id=245523
1.1 This Part of EN 10263 is applicable to round rod and round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading, cold extrusion, subsequent quenching and tempering and induction hardening or flame hardening.
1.2 prEN 10263-1:2013 is ...
https://sales.sfs.fi/julkaisu.html.stx?id=626778
1.1 This Part of EN 10263 is applicable to round rod, round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion and subsequent case hardening treatment.
1.2 prEN 10263-1:2013 is indispensable for this Part of EN 1026 ...
https://sales.sfs.fi/julkaisu.html.stx?id=622084
1.1 This Part of EN 10263 is applicable to round rod and bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion without subsequent heat treatment on the final components.
1.2 prEN 10263-1:2013 is indispensable for this ...
https://sales.sfs.fi/julkaisu.html.stx?id=620765
SFS-EN ISO 17263:en – Älyliikennejärjestelmät. Ajoneuvojen ja laitteiden automaattinen tunnistus. Järjestelmäparametrit
Verkkokaupan tuotteet
SFS-EN ISO 13263:2017:en – Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength (ISO 13263:2010)
Verkkokaupan tuotteet
SFS-EN 13263-1 + A1:en – Betoniin käytettävä silika. Osa 1: Määritelmät, vaatimukset ja vaatimustenmukaisuus
Verkkokaupan tuotteet
SFS-EN 13263-1 + A1 – Betoniin käytettävä silika. Osa 1: Määritelmät, vaatimukset ja vaatimustenmukaisuus
Verkkokaupan tuotteet
CEN ISO/TR 26369:en – Cosmetics. Sun protection test methods. Review and evaluation of methods to assess the photoprotection of sun protection products (ISO/TR 26369:2009)
Verkkokaupan tuotteet
SFS-EN ISO 7263 – Corrugating medium. Determination of the flat crush resistance after laboratory fluting (ISO 7263:1994)
Verkkokaupan tuotteet
SFS-EN ISO 17263/AC:en – Intelligent transport systems. Automatic vehicle and equipment identification. System parameters. Technical Corrigendum 1 (ISO 17263:2012/Cor 1:2013)
Verkkokaupan tuotteet
SFS-EN 10263-4:2017:en – Kylmätyssäys- ja kylmämuovausteräkset. Valssilangat, tangot ja langat. Osa 4: Nuorrutusterästen tekniset toimitusehdot
Verkkokaupan tuotteet
SFS-EN 10263-3:2017:en – Kylmätyssäys- ja kylmämuovausteräkset. Valssilangat, tangot ja langat. Osa 3: Hiiletysterästen tekniset toimitusehdot
Verkkokaupan tuotteet
SFS-EN 10263-2:2017:en – Kylmätyssäys- ja kylmämuovausteräkset. Valssilangat, tangot ja langat. Osa 2: Tekniset toimitusehdot teräksille, joita ei ole tarkoitettu lämpökäsiteltäviksi kylmämuovauksen jälkeen
Verkkokaupan tuotteet