Hakutulokset
Hakutulokset
Haulla "130" löytyi 564 tulosta.
This part of ISO 13090 provides guidance on the safety aspects of the design of equipment and the conduct of tests and experiments in the laboratory in which human subjects 1) are exposed to mechanical vibration and repeated shock.
This part of ISO 13090 is concerned with tests and experiments in ...
https://sales.sfs.fi/julkaisu.html.stx?id=12178
This document is to be used together with EN 13001-1 and EN 13001-2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of cranes by design and theoretical verification.
NOTE 1 Specific requirements for particular types of crane are given in the app ...
https://sales.sfs.fi/julkaisu.html.stx?id=726509
ISO 13088:2011 specifies the minimum requirements for the filling conditions and filling inspection of acetylene cylinder bundles. It applies both to both bundles which are filled while the cylinders are assembled in the bundle and to bundles of which the cylinders are filled as individual cylind ...
https://sales.sfs.fi/julkaisu.html.stx?id=227184
ISO 13079:2011 specifies requirements for single-use and re-usable glass and plastics tubes for measuring the erythrocyte sedimentation rate (ESR) by the Westergren method, and for a support to hold tubes during the performance of the test. These so-called "Westergren tubes" are also sometimes de ...
https://sales.sfs.fi/julkaisu.html.stx?id=172192
ISO 11130:2017 specifies a method for assessing the corrosion resistance of metals by an alternate immersion test in salt solution, with or without applied stress.
The test is particularly suitable for quality control during the manufacture of metals including aluminium alloys and ferrous materia ...
https://sales.sfs.fi/julkaisu.html.stx?id=653467
This document specifies a method for the determination of the equivalent-sphere particle size distribution of coating powders by laser diffraction, for particles of the size range from 1 µm to 300 µm.
NOTE There is a possibility that particle sizes >300 µm need the use of a different optica ...
https://sales.sfs.fi/julkaisu.html.stx?id=768024
This document specifies a comparative method for determining the flow characteristic of a fused thermosetting coating powder down a plane inclined at a set angle to the horizontal.
The aim of the test method described in this document gives an indication of the degree of melt flow that can occur ...
https://sales.sfs.fi/julkaisu.html.stx?id=768030
This document specifies a method for the determination of the particle size distribution of coating powders by sieve analysis. Particle size distributions with a maximum of less than 100 µm is determined by laser diffraction, ISO 8130-13. This method is used especially for determining the oversi ...
https://sales.sfs.fi/julkaisu.html.stx?id=768021
ISO 13130:2011 specifies requirements and tests for desiccators and vacuum desiccators intended for general laboratory purposes such as drying of substances or material.
The standards writing body responsible for this document in Finland is General Industry Federation.
https://sales.sfs.fi/julkaisu.html.stx?id=172190
ISO 13085:2014 specifies the technical delivery condition, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy pipes for use as tubing for wells in petroleum and natural gas industries.
The standards writing ...
https://sales.sfs.fi/julkaisu.html.stx?id=247505
SFS-EN ISO 13090-1:en – Mekaaninen värähtely ja isku. Turvallisuusnäkökohdat erityisesti koehenkilöillä tehtävissä testeissä. Osa 1: Altistuminen koko kehon tärinälle ja toistuville iskuille
Verkkokaupan tuotteet
SFS-EN 13001-3-4:2018:en – Nosturit. Yleissuunnittelu. Osa 3-4: Koneistojen rajatilat ja kelpoisuusnäyttö. Laakerit
Verkkokaupan tuotteet
SFS-EN ISO 13088:en – Kaasupullot. Asetyleenipullopaketit. Täyttöolosuhteet ja -tarkastus
Verkkokaupan tuotteet
SFS-EN ISO 13079:en – Laboratoriolasit ja -muovit. Westergrenin menetelmällä tehtävässä laskon mittauksessa käytettävät putket ja telineet
Verkkokaupan tuotteet
SFS-EN ISO 11130:2018:en – Corrosion of metals and alloys. Alternate immersion test in salt solution (ISO 11130:2017)
Verkkokaupan tuotteet
SFS-EN ISO 8130-13:2019:en – Coating powders. Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)
Verkkokaupan tuotteet
SFS-EN ISO 8130-11:2019:en – Coating powders. Part 11: Inclined-plane flow test (ISO 8130-11:2019)
Verkkokaupan tuotteet
SFS-EN ISO 8130-1:2019:en – Coating powders. Part 1: Determination of particle size distribution by sieving (ISO 8130-1:2019)
Verkkokaupan tuotteet
SFS-EN ISO 13130:en – Laboratoriolasit. Kuivauslaitteet
Verkkokaupan tuotteet
SFS-EN ISO 13085:en – Petroleum and natural gas industries. Aluminium alloy pipe for use as tubing for wells (ISO 13085:2014)
Verkkokaupan tuotteet